Thursday, December 18, 2014

60 Minutes: Electronic Wasteland


60 Minutes: The Electronic Wasteland

                “E-Waste” has become a large issue!  130,000 computers and 100,000,000 cell phones are thrown away in the US every year.  Recyclers that say they are recycling the products they receive “properly”. In reality there are thousands of containers being shipped to the Far East to either be stripped down for high value parts such as the precious metals in cell phones. The remainders of CRT (Cathode Ray Tube) screens and other electronic devices are just thrown into massive piles in fields. It is truly appalling that impoverished people are being exploited for this work because they need the money to survive even though they were destroying the same environment they live in.

·         If the plastics that make up products such as monitors, computers or cell phones were made from biodegradable plastics, such as Polyanhydrides, the excess materials that cannot be recycled would be broken down in landfills and not harm the environment.

·         To recycle items such as lead from CRT screens, there should be a certified and monitored facility that filters the harmful chemicals and particles out of the air as they are recycled.

·         Put a responsibility on the manufacture to recycle their product at the end of the life cycle. If there is a refundable fee to the consumer when the product no longer works, the item can be recycled and disposed of properly.




El Dorado


 
Who:

 The designing + making concept behind El Dorado inc began in 1995, when architect Jamie Darnell began taking welding classes. By late 1995, it was time for the company to move out of the Kansas City Kansas Vocational Technical High School and decided to set up their own shop. El Dorado Public Architecture is an organization with a simple goal: to address public interest through architecture and solve problems of human interaction within the built environment.
 
Products & Services:
El Dorado is an architecture firm that provides interior or exterior architecture services for anyone from commercial businesses to private residences. In 2005 it launched its 1% program, a now nationally recognized portfolio of pro-bono work by architects and firms ready to donate 1% of their year’s billable hours to provide work for nonprofit organizations requesting a variety of services that strengthen their architectural identity and community impact.  There are 1100 firms registered with the 1% program.
 
Markets:
·         Commercial
·         Residential
·         Civic / Institutional
·         Public Art
·         Industrial
Due to a meeting with Tom over my final project, I was unable to be at El Dorado for the tour of the shop area.

Target: Watches






https://www.youtube.com/watch?v=mo7OGGVGnW8
https://www.youtube.com/watch?v=92F3nwv7HDk


Berry Plastics


Berry Plastics

 
Who:

Originally Berry Plastics was established in 1967 under the name Imperial Plastics. In 1972, the injection molding company entered the container market and in 1983, Imperial Plastics was purchased by Jack Berry, Sr., and renamed Berry Plastics. From 1988 through 2014, Berry Plastics Group, Inc. has completed nearly 40 acquisitions and began trading on the New York Stock Exchange in October 2012 under the ticker symbol BERY. Worldwide, Berry Plastics has 75 companies (most of which are in the US)

Today Berry Plastics has…

·         300 Million pounds of closures produced annually

·         2,885 primary manufacturing machines

·         13,000+ customers

·         3.7 billion Thermoformed cups produced in 2013

·         751 active granted patents

·         30,000+ skus

·         16,500+ employees

·         2.5 billion pounds of resin purchased annually

Products & Services:
·         Packaging

o   Flexible: Stretch Film, Food Film & Packaging and Supermarket Film

o   Hybrid: “NuSeal” Recloseable flexible containers, “Rigid Lens II” Flexible container with a recloseable rigid lid.

o   Rigid: Recloseable food containers, Drink Cups, Bottles, Closures (Lids/Caps), Home & Party Products, Overcaps, Medicinal Vials, Jars, Tubes

·         Protection Solutions:

o   FIBC (Flexible Intermediate Bulk Containers)

o   Medical

o   Supermarket Film

o   Personal Care Film

o   Institutional Can Liners

o   Agricultural Film

o   Sheeting

o   Trash Bags

o   Seal for Life (cathodic protection, self-healing corrosion prevention and sealing, tape-based protection, heat shrinkable technology, and liquid sealing)

·         Tapes & Adhesives

o   Tape: Duct, Foil, Masking, Plumbing, Electrical, Double-Sided, Wire Harness, Cargo Pit, Woven, Non-Woven, Flashing, Film, Foam, Transfer, Preservation & Sealing, Surface Protection, Moisture Barrier, Clean Room, Color Coding & Labeling

Materials:
·         Polyolefin

·         Polypropylene

·         Polyethylene (Berry Plastics is the largest single consumer in the world)

Markets:
·         Personal Care

·         Household

·         Food

·         Beverages

·         Foodservice

·         Health Care

·         Industrial

·         Transportation

Forming:
·         Thermoforming: manufacturing process where a plastic sheet is heated to a pliable forming temperature, formed to a specific shape in a mold, and trimmed to create a usable product.

1.       Virgin material mixed with reground material

2.       (45% virgin to 55% reground material)

·         Melted into sheets

·         Thermoformed into uncut sheets of the desired product

·         Leftover or scrap material goes through 2 grinders to be used again

·         Injection Molding: is a manufacturing process for producing parts by injecting material into a mold.

1.       Plastic enters the mold at 500 degrees

2.       Closed loop 60 degrees water cooled molds to harden the plastic into the desired shape

·         5-12 sec/cup

·         4 sec/lid

3.       Once molded polyethylene requires 7 weeks to fully cure

4.       Polyethylene can be remolded 10-14 times before it cannot be used

Cutting:
Once the product is molded into the desired shape, the sheet passes into a press at the end of the line and stamped out of the sheet then collected for packaging.

Finishing:
Onsite ink lab with a PMS color system

·         Up to 8 colors

·         Dries almost instantly when exposed to high heat

·         Quality checked for consistency by customer’s needs

·         Excess ink is recycled by adding color dyes for later jobs



Cell Phone Material
Plastic
The casing of the cell phone is made of plastic. Plastic is a man-made material derived from petroleum. Manufacturers distill crude oil known as “heavy petrol” and treat it with heat to create the hardened plastic. Polycarbonate and acrylonitrile butadiene styrene are the plastics that make up the majority of the casing, keypad and adapters. Brominated flame retardants coat the plastic shell.
 
Liquid Crystal
Liquid crystal displays, known as LCDs, are flat-panel displays that consume very little power. Most cell phones use this type of screen as their main display units. Thin layers of glass with liquid crystals sandwiched between them compose LCD screens, which illuminate via electric charge. The liquid crystalline substances in LCD screens contain small amounts of the toxic element mercury.

Batteries and Power Sources

A Li-Ion battery is used to power this phone and contains elements such as lithium, nickel, cobalt, cadmium, zinc and copper. The included wall-socket charger contains copper wires or small amounts of gold and cadmium in the plastic casings.

Other Materials
Fiberglass or epoxy resin composes the base for the phone’s circuit boards. Copper elements often accent the circuit boards, acting as transistors. According to the Earthworks environmental advocacy organization, cell phones commonly contain substances including lead, mercury, beryllium, arsenic, beryllium, brominated flame retardants, lead, nickel, palladium, silver, tantalum, cadmium and antimony. Though harmless during day-to-day use, some of these materials become toxic when incinerated. This fact, coupled with the massive worldwide use of cell phones, is a good reason for users to recycle their phones after use rather than disposing of them.



Metal Mineral Location
. Arsenic (gallium arsenide in the amplifier and receiver). Mined in China, Chile, Morocco, Peru, Kazakhstan, Russia, Belgium and Mexico.
. Copper (circuitry). Mined in Chile, United States, Peru, China, Australia, Russia, Indonesia, Canada, Zambia, Poland, Kazakhstan and Mexico.
. Gallium (gallium arsenide). Mined in China, Germany, Kazakhstan and Ukraine.
. Gold (circuitry). Mined in China, United States, Australia, South Africa, Peru, Russia, Canada, Uzbekistan, Ghana, Papua New Guinea, Indonesia, Brazil, Mexico and Chile.
. Magnesium compounds (phone case). Mined in China, Turkey, North Korea, Russia, Slovakia, Austria, Spain, Australia, Brazil, Greece, India and the United States.
. Palladium (circuitry). Mined in Russia, South Africa, Canada, United States and Zimbabwe.
. Platinum (circuitry). Mined in South Africa, Russia, Canada, Zimbabwe, United States and Colombia.
. Silver (circuitry). Mined in Peru, Mexico, China, Australia, Chile, Russia, United States, Poland, Bolivia and Canada.
. Tungsten (circuitry). Mined in China, Russia, Canada, Austria, Bolivia and Portugal.

Huhtamaki


Who:

The North American division is home to 16 production units in the United States and Mexico with more than 3,200 employees. Corporate offices are located in De Soto, KS. Worldwide the company employees 12,800 people with a net sale of 2 billion Euros last year operating out of 31 countries and 58 manufacturing units.

 The growth of Huhtamaki in America is largely due to the acquisition of established companies like Sealright and the Keyes Fibre Company in the late 1990s. The Chinet brand traces its roots back to 1903 and inventor Martin Keyes, whose molded fiber technology laid the foundation for the Keyes Fibre Company in Waterville, ME where the product is still made today.

Products & Services:

This segment serves local markets with Chinet disposable tableware, packaging for consumer goods and foodservice packaging.

Tableware: Huhtamaki offers a full line of single-use tableware, including plates, platters and bowls in a wide variety of popular sizes and designs.  Products are available in molded fiber, paper and plastic with options to meet every budget and every need, ranging from simple back-of-house preparation to premium front-of-house presentation.

Hinged Containers: Chinet hinged containers are an alternative to foam, offering a combination of strength and sustainability.  They easily handle heavy food and are compostable once the meal has been served.  The design protects food during transit, while the locking mechanism ensures food stays secure.  Made in the USA and available in a variety of sizes, Chinet hinged containers are great for the eco-conscious customer.

Drink Carriers & Trays: Huhtamaki offers a wide variety of trays and carriers.  Made from materials ranging from molded fiber to handled paper, all Huhtamaki carriers and trays transport food and beverages securely, minimizing the potential for spills, tips or leaks. 

Food Trays: Huhtamaki offers an extensive line of food trays, cartons and boxes in a wide range of popular shapes, sizes and functions.  All products are made from renewable resources and are available as shown, featuring a popular stock print, or custom-printed to enhance brand recognition.  In addition, Huhtamaki trays, cartons and boxes can be customized to include windowing, embossing, double sided printing and custom sizes, ensuring you have everything needed to meet customer demand.

Food Containers & Lids: Huhtamaki offers a complete line of food containers and lids in a wide range of sizes and designs, all proudly made in the USA. The construction and tight-fitting lids ensure foods stay at their optimal temperature (whether hot or cold) and customers stay protected from burns, chills, leaks and spills. Available in sizes ranging from six to 64-ounces and a variety of stock and custom prints, there is a container ideal for any portion, product and brand.

Cups & Lids: Huhtamaki offers a full line of cups and lids for a wide variety of beverages to meet every budget and need. Products are available in paper or plastic and are ideal for serving everything from hot coffee to cold iced tea. The line even includes kids' cups that are small for spill-prone hands.

Cutlery: Huhtamaki's complete line of Bioware CPLA cutlery offers premium strength paired with sustainability. The durable, 100% compostable cutlery withstands temperatures up to 190° F, suitable for hot soups, cold ice creams and everything in between.

Materials:

·         Paperboard

o   Bleached White SBS

o   Unbleached (SUS) or “kraft”

o   Newsback and recycled grades

·         Commodity Plastic Resins

·         Molded Fiber (wood Celulous) Primarily made from repurposed company waste.

·         (PP) Polypropylene

·         (LDPE) Low Density Polyethyline

·         (HDPE) High Density Polyehtyline

·         (PS) Polystyrene

·         (PET) Polyster

·         (CPET) Crystalline PET

·         (PLA) PolyLactic Acid

·         (UHMW) Ultra high molecular density polyethylene

·         Polyacetal (Delrin)

·         Acrylics

·         Polycarbonate (lexan)

·         Nylon

·         Aluminum alloy (6061-t6)

·         Carbon Steel

·         Stainless Steel

Markets:

Food service companies such as Ben & Jerry’s, McDonald’s, Sysco, Walmart, Kroger, Arby’s, Wendy’s, KFC and Starbucks.

Forming:

For the products that are formed in-house, specific guides within the production line fold the cartons into shape. The flat stock that comprise the cups are fitted around dies just before they are glued.

Cutting:




·         CNC

·         An assortment of lathes

·         Die cutting

Joining:

Most of the product is shipped out unglued to maximize shipping efficiency. Many of the other products, like paper cups, the gluing process is done inside the same production machines.

Finishing:

·         The facility is climate controlled to maintain a specific humidity percentage in the paper.

·         The product must sit for 2 days after printing to fully dry.

·         After the product is boxed and stacked, the pallet is set on an automatic shrink wrapper for secure shipping.